|
Specifications
for Syndecrete
GENERAL:
SYNDECRETE® shall be custom fabricated to plans and specifications
in conformance with the construction documents or drawings as noted:
SYNDECRETE® shall conform with the strict quality control standards
and guidelines established by Syndecrete at 2908 Colorado Avenue, Santa
Monica, California 90404-3616 USA TEL (310) 829-9932 FAX (310) 829-5641.
SYNDECRETE® shall meet or exceed the minimum average physical properties
of the independent testing defined in the Technical Bulletin.
COLOR/FINISH:
Syndecrete shall submit, upon written request, samples sufficient to represent
the general color and finish for approval. Finished pieces shall match
samples within the limitations inherent to the material as defined on
the sample disclaimer.
Color/Finish Defined:
SYNDECRETE® Color #:_____ Finish:_____
FIELD MEASUREMENTS / SHOP DRAWINGS:
Syndecrete shall submit shop drawings upon request for approval. These
drawings shall be limited to SYNDECRETE® only and shall show placement
of joints, thickness, edge profile, etc. in relation to adjacent materials
if necessary. Syndecrete shall coordinate with contractor and architect
to determine appropriate substrate and method of attachment, (Structure
to support SYNDECRETE® by other.)
Syndecrete shall verify all dimensions with field measurements and note
any discrepancies or deviations to specifier immediately.
Syndecrete shall make available at its Santa Monica location, fabricated
pieces for inspection by specifier prior to installation.
INSTALLATION:
SYNDECRETE® shall be installed by an authorized trained installer
familiar with the specific installation methods, terms and guidelines
as established by Syndecrete.
Protection of finished SYNDECRETE® surfaces to be provided by other.
CARE/MAINTENANCE:
Syndecrete shall provide general care and maintenance information and
make available sealer or wax if required and upon request.
WARRANTY:
Syndecrete shall warrant SYNDECRETE® products or services to be free
from manufacturing defect.
|
